JSON-LD markup generated by Google Structured Data Markup Helper.

Shop will be closed from Dec. 24th to Jan. 5th, coming back to the shop on Monday the 5th.

Go to…









Chevrolet

Home / Chevrolet

We Service and Repair all Chevrolet cars

  • 2013 Chevrolet Spark

    Chevrolet Spark
    Mileage
    48,173
    Service Date
    10/17/2025
    Services Performed
    • Scanned for codes, found P0597- Coolant Thermostat Heater Circuit. Tested all the wiring for the coolant thermostat heater & everything tested good. Installed a 3 amp fuse jumper wire between the control circuit on terminal 2 and the ignition circuit on terminal 1, commanded control module E41 for the engine coolant thermostat heater on with a professional scan tool. Scan tool was displaying a malfunction with the coolant thermostat heater. Recommend replacing the thermostat housing assembly, customer approved.
    • Drained coolant into a clean bucket & removed hose clamp connected to the thermostat housing. Removed thermostat housing hardware & coolant hose connected to the thermostat housing. Removed thermostat housing & installed new thermostat & housing. Torqued hardware to specification & assembled hose clamp in the same orientation. Also removed and replaced coolant expansion tank due to leaking top port. Vacuum tested cooling system & vacuum filled cooling system. Pressure tested cooling system to ensure no leaks are present. Test drove the vehicle to ensure the cooling system is functioning properly.
    • Drained oil and removed filter. Installed premium oil filter and refilled with 0W20 synthetic oil. Confirmed oil level and reset oil monitoring system. Performed visual inspection of the vehicle & found the engine air filter severely dirty. Recommend replacing air filter, customer approved replacement. Removed & replaced engine air filter.
     
    Wyatt T. gave our service a 5 star review on 10/18/2025

  • 2009 Chevrolet Malibu

    Chevrolet Malibu
    Mileage
    138,886
    Service Date
    10/10/2025
    Services Performed
    • Removed front wheels & removed wheel speed sensors. Removed CV axle out of the front hub assembly's. Removed any other necessary hardware. Installed new wheel bearing assembly & installed wheel speed sensors. Assembled everything back together in reverse order & torqued all necessary hardware to specification.
    • Removed sway bar end links & any brackets. Removed Shock hardware & removed shocks. Installed new shocks & torqued all shock hardware to specification.
    • Removed inner & outer tie rods. Installed new inner & outer tie rods. Assembled front wheels & torqued front wheels to specification.
    • Lifted vehicle in the air & installed wheel alignment targets. Aired wheels to specification & entered customers vehicle information onto alignment machine. Saved before measurements & started the alignment process. Adjusted alignment measurements to specification & saved after measurements. Printed out before & after measurements to show to the customer. Test drove the vehicle to ensure it drives straight.
     
    Cadence H. gave our service a 5 star review on 10/11/2025

  • 2008 Chevrolet Impala

    Chevrolet Impala
    Mileage
    67,442
    Service Date
    7/25/2025
    Services Performed
    • Removed oil filter housing and replaced oil filter housing gasket. Checked and verified no leaks.
    • Lifted front wheels on the ground & removed front driver side wheel & removed CV axle hub nut, used a pry bar to remove CV axle from front differential & removed any necessary non alignment hardware on the knuckle to pull the CV axle off the hub, removed CV axle & assembled new CV axle into differential hub & front differential, torqued axle nut to specification & all necessary hardware, assembled front wheels & torqued them to specification, test drove vehicle to ensure no clunking noises are present.
     
    Jeff P. gave our service a 5 star review on 7/29/2025